Standoff 2 Sensitivity Converter
Enter your old device, new device, and current settings to get a recommended starting point after switching devices.
Old device
New device
Game settings
Standoff 2 acceleration is speed-based: faster finger movement increases the turn amplification. It is affected by touch sampling, swipe speed, and grip style, so this tool keeps it unchanged by default instead of forcing a PPI conversion.
Feel adjustment accounts for phone/tablet grip differences: phone to tablet usually needs a small boost; tablet to phone usually needs a small reduction.
Recommended new settings
Base ratio
Swipe sensitivity
3.06
Scope sensitivity
2.29
Acceleration
0.00
Smoothing
0.00
Old device PPI
404.9
New device PPI
264.7
Base ratio
1.530
Adjustment multiplier
1.00
Acceleration is treated as speed-based and kept unchanged by default; smoothing is also kept unchanged. They are not static distance sensitivity values, so a resolution-only conversion would be misleading.
Practice range calibration
1Apply the new settings in game, enter the practice range, stand still, and aim at a fixed reference point.
2Use one comfortable swipe distance, then compare the turn angle with your old device. A 180-degree turn is the easiest reference.
3If the turn is short, raise swipe and scope by 5%-10%. If it turns too far, lower them by 5%-10%. If fast flicks and slow tracking feel too different, reduce acceleration first.
Note: Standoff 2 does not publish an official conversion formula. This tool estimates by physical screen pixel density and gives a starting point; final tuning should be done in the practice range.